Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Registration plate issues | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake pipe excessively chafed |3.2.B2a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front position lamp missing no side light
|1.1.1a| | 1 |
Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Registration plate lamp issues | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Rear Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake pipe excessively chafed |3.2.B2a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp not working with foot brake (4.3.1 (a) (ii)) | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |