| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 24 |
| Rear reflector on motorcycle missing |1.4.1| | 19 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Registration plate issues | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Offside Headlamp switch insecure |1.2.4| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Inner Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Suspension arm pin or bush excessively worn swing arm (5.3.4 (a) (i)) | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
| Rear reflector missing Replaced reflector (4.8.2 (a) (ii)) | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |