| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 70 |
| Drive chain excessively loose |6.2.1d| | 22 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Drive chain worn to excess |6.2.1e| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Handlebar deformed |2.1.1b| | 5 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Registration plate lamp issues | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Horn not working |1.7.3a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Registration plate issues | 3 |
| Rear Drive chain worn to excess |6.2.1e| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Drive chain excessively tight |6.2.1d| | 2 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Brake disc significantly and obviously worn warped (1.1.14 (a) (i)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock on l/h lock (2.1.4 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock When turning left |2.1.4 |b|| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Shock absorber has negligible damping effect Offside & Nearside |5.3.2 |b|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Front Brake master cylinder defective but brake still operating |1.1.10 |b| |i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak Fork seal leaking. |5.3.2 |b|| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil right fork seal leaking |2.3.3| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear wheel rotation likely to be impeded drive chain |6.2.1b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Front Lower Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Front Stop lamp not working brake (4.3.1 (a) (ii)) | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Upper Throttle operating incorrectly |6.2.1f| | 1 |
| Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Riders seat insecure |6.2.1a| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Lower Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. re afix lh grip |2.1.1c| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Brake disc contaminated (1.1.14 (b)) | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Fuel system component leaking carburettor bowl seal (6.1.3 (b) (i)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Rear Brake lever excessively corroded |3.2.A1c| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Direction indicator obviously incorrectly positioned too close 240mm separation required (4.4.3 (a)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake lever pivot excessively tight Does not release (1.1.1 (a)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Front Wheel has bolts/rivets missing or loose to the extent that control of the motorcycle is likely to be adversely affected front wheel bearings have play/replaced (5.2.2 (e) (ii)) | 1 |
| Drive chain excessively loose due to link being broken |6.2.1d| | 1 |
| Rear Exhaust is leaking and excessively noisey silencer |7.1.1b| | 1 |
| Front Stop lamp not working front brake switch not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Stop lamp not working stop lamp inoperative with the use of front brake control (4.3.1 (a) (ii)) | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Handlebar deformed slightly bent ok @ test |2.1.1b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake cylinder leaking hydraulic fluid brake calliper |3.2.B1e| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |