| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Central Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Engine mounting/bracket missing two bolts missing and another broken off |6.1.8 |a| |ii|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Brake disc significantly and obviously worn both front discs warped |1.1.14 |a| |i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Central Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Front Motorcycle structure excessively damaged mudguard |6.1.1a| | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake hose leaking (1.1.12 (c)) | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Central Rear Upper Stop lamp not working Front Brake Light Switch Did Not Operate (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies wire off switch |1.3.1a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls Rear switch needed adjusting (4.3.2 (a) (iii)) | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Upper Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Lower Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Registration plate lamp issues | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Registration plate issues | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |