Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Rear reflector on motorcycle missing |1.4.1| | 14 |
Registration plate issues | 13 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Horn not working |1.7.3a| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Brake caliper insecure Bolts loose (1.1.16 (c) (i)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp not working on dipped beam Main beam stays on (4.1.1 (a) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on side light |1.1.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Fuel system component leaking excessively or a risk of fire fuel leaking from offside carburettor |6.1.3 |b| |ii|| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Horn control defective |1.7.2a| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Brake hose damaged | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Indicator switch defective |1.5.4| | 1 |
Front Stop lamp missing not working |1.3.3a| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working from control 1 (front Brake) (4.3.1 (a) (ii)) | 1 |
Centre Front Front position lamp missing |1.1.1a| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Upper Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Horn missing |1.7.1| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Brake component has an inadequate repair bolt hitting disc |3.1.5| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Fuel pipe leaking |7.2.1a| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Direction indicators not working nearside only - switch faulty |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Brake hose excessively deteriorated | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Lower Brake component is excessively corroded |3.1.5| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Nearside Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
Offside Front suspension spring worn and seriously weakened |2.3.2b| | 1 |