>

MOT History from tests of petrol HONDA CB650s year 1981

Review the list of common HONDA CB650 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:74.43%
(The average a petrol HONDA CB650 year 1981 passes without issue)
Based on:305 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment13
Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Drive chain excessively loose |6.2.1d|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Horn not working |1.7.3a|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Throttle operating incorrectly |6.2.1f|3
Riders seat insecure |6.2.1a|3
Registration plate issues3
Front Brake lever cannot be released smoothly |3.1.3d|2
Front Stop lamp not working (4.3.1 (a) (ii))2
Offside Rear Direction indicator not working |1.5.1c|2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear Drive chain worn to excess |6.2.1e|2
Handlebar mounting clamp loose |2.1.1a|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Steering headbearing has excessive free play |2.2.2|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Brake lever cannot be applied smoothly |3.1.3d|1
Headlamp aim beam image kick up to the offside |1.6|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front Plate brake test indicates a sticking brake |3.3.B1a|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front Direction indicator not working |1.5.1c|1
Nearside Outer Rear Direction indicators not working |1.5.1c|1
Throttle operating incorrectly throttle sticks on full lock to the right |6.2.1f|1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering lock stop ineffective throttle cables hitting fuel tank when turning to the right |2.1.3|1
Offside Front Direction indicator insecure |1.5.3b|1
Rear wheel spindle loose |2.4.A.2b|1
Offside Direction indicator not working |1.5.1c|1
Front suspension assembly component loose |2.3.1|1
Stop lamp remains on when the brake is released |1.3.1e|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Rear Position lamp not working |4.2.1 |a||1
Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii||1
Steering movement excessively rough with the weight on the lower bearing |2.2.1a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||1
Centre Rear reflector on motorcycle missing |1.4.1|1
Exhaust excessively deteriorated |7.1.1a|1
Drive chain excessively tight |6.2.1d|1
Inner Front Brake locking device insecure |3.2.A1e|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Steering movement excessively rough with the wheel raised |2.2.1b|1
Nearside Front Direction indicator not working |1.5.1c|1
Nearside Rear shock absorber insecurely mounted |2.4.A.3b|1
Offside Rear shock absorber insecurely mounted |2.4.A.3b|1
Front Valve stem seriously damaged Front valve stem rubber perished, Instant deflation possible (5.2.3 (j))1
Rear Rear reflector missing Rear reflector missing (4.8.2 (a) (ii))1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Horn control not functioning. |1.7.2b|1
Rear reflector missing (4.8.2 (a) (ii))1
Horn not working (7.7 (a))1
Offside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Front An item not tested |Manual|1
Nearside Rear Direction indicator not working |1.5.1c|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake excessively binding (1.2.1 (f))1
Throttle operating incorrectly sticking (6.2.7 (a) (i))1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear suspension bearing has excessive free play swingarm pivot |2.4.A2a|i||1
Fuel system component leaking r/h carb leaking |7.2.1a|1
Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Offside Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Nearside Front Brake caliper(s) insecure (3.2.A1j)1
Offside Front Brake caliper(s) insecure (3.2.A1j)1
Headlamp aim beam image kick up to the offside (1.6)1
Centre Fuel system component leaking |7.2.1a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Drive chain excessively loose |6.2.1d|1
Nearside Fuel system component leaking |7.2.1a|1
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Headlamp switch insecure |1.2.4|1
Front suspension has inadequate damping effect. |2.3.6c|1
Direction indicator not working (4.4.1 (a) (ii))1
Fuel system component insecure |7.2.1b|1
Offside Rear Footrest insecure |6.2.1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy