Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Horn not working |1.7.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Registration plate issues | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Fuel system component leaking |7.2.1a| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Brake hose excessively deteriorated | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Horn not working |1.7.3a| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Lower Footrest insecure |6.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake torque arm front and rear |6.2.1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel spindle nut |6.2.1h| | 1 |
Rear shock absorber insecurely mounted both |2.4.A.3b| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear position lamp does not face the rear |1.1.1d| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Horn control defective |1.7.2a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Rear Lower Brake back plate|s| insecure |3.2.A1j| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Rear Wheel spoke excessively loose broke |4.2.1b| | 1 |
Brake reaction bracket insecure no split pin |3.2.A1j| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Horn control defective button missing |1.7.2a| | 1 |
Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |