| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 41 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Registration plate issues | 9 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Drive chain worn to excess |6.2.1e| | 6 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Horn not working |1.7.3a| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Drive chain worn to excess |6.2.1e| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Rear Position lamp not working |4.2.1 |a|| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear Brake locking device missing |3.2.A1e| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 2 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Lower Brake locking device missing |3.2.A1e| | 1 |
| Brake back plate|s| securing bolt|s| missing rod incorectly passed between lever and trunnion |3.2.A1j| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Horn missing |1.7.1| | 1 |
| Centre Front Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Rear Drive chain excessively tight, so that it is likely to fail Adjusted (6.1.7 (k) (ii)) | 1 |
| Central Front Steering headbearing has excessive wear or free play adjusted (2.2.2 (f) (i)) | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Offside Rear Upper Rear suspension component cracked |2.4.A.1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Offside Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Rear Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Rear Motorcycle structure cracked |6.1.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Headlamp lens seriously defective no headlight adjuster |4.1.1 |b| |ii|| | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Offside Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Brake lever cracked and bent |3.1.2c| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Motorcycle structure adversely modified both crash bar systems a danger to other road users |6.1.1b| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Brake performance not tested |3.3| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Nearside Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
| Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake arm locking devise missing |6.2.1h| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Rear Brake rod insecure lower |1.1.15 |c|| | 1 |
| Suspension component mounting has an unsafe modification front and rear hub split pins missing |5.3.3 |c| |i|| | 1 |
| Clutch lever positioned so it cannot be readily operated loose |6.2.7 |b|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Direction indicator not working righthand (4.4.1 (a) (ii)) | 1 |
| Rear Direction indicator not working righthand (4.4.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front An item not tested |Manual| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Rear Rear suspension component cracked |2.4.A.1a| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride two split pins missing rear hub |6.2.1h| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Fuel system component leaking Leaking from carb overflow pipes |7.2.1a| | 1 |
| Nearside Front Brake component defective due to a deliberate modification which significantly reduces the original strength Disc pads packed out with aluminium spacers |3.1.5| | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |