Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Brake hose excessively deteriorated | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake locking device missing |3.2.A1e| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Offside Front Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment brake arm loose |3.2.A1i| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel fixing loose |single fixing| spindle nut |5.2.1 |a| |ii|| | 1 |
Wheel more than one fixing loose rear spindle nut |5.2.1 |a| |ii|| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Sidecar rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Sidecar suspension fouling |5.2.2| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Horn not working |1.7.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Fuel hose leaking |7.2.1a| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake component is excessively corroded calipers |3.1.5| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Chain link not riveted correctly. |6.2.1h| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Registration plate issues | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pivot excessively worn Brake hub pivot (1.1.15 (b)) | 1 |
Rear Brake component modification unsafe Brake tie rod (1.1.21 (d) (i)) | 1 |
Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Headlamp switch faulty hi/lo switch faulty |1.2.4| | 1 |
Steering lock stop maladjusted damaged |2.1.3| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Stop lamp does not illuminate immediately a brake applies front stop switch |1.3.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |