>

MOT History from tests of petrol HONDA CB400s year 1995

Review the list of common HONDA CB400 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:83.81%
(The average a petrol HONDA CB400 year 1995 passes without issue)
Based on:525 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment12
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Exhaust is leaking and excessively noisey |7.1.1b|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|4
Front wheel bearings have excessive free play |2.3.5b|4
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear reflector on motorcycle missing |1.4.1|4
Drive chain worn to excess |6.2.1e|3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Handlebar deformed |2.1.1b|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Front Throttle operating incorrectly |6.2.1f|2
Registration plate issues2
Steering headbearing has excessive free play |2.2.2|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Front Stop lamp not working |4.3.1 |a| |ii||2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Front wheel bearings are excessively rough |2.3.5b|1
Fuel system component leaking |7.2.1a|1
Nearside Front Direction indicator insecure |1.5.3b|1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
Rear Suspension component likely to fail Shock absorbers have insufficient travel (5.3.3 (b) (ii))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Upper Fuel pipe leaking |7.2.1a|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Outer Front Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear Roller brake test indicates a binding brake |3.3.A1a|1
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Nearside Front Brake caliper insecure (1.1.16 (c) (i))1
Central Front Lower Floor brake test indicates a binding brake |3.3.C2c|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Nearside Front Handlebar mounting insecure Clutch operch to handlebar loose (2.2.1 (a) (i))1
Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle mounting insecure adversly affecting safe operartion (6.2.7 (a) (ii))1
Rear reflector missing |4.8.2 |a| |ii||1
Rear Valve stem seriously damaged |5.2.3 |j||1
Headlamp insecure |1.2.3b|1
Drive chain excessively loose |6.2.1d|1
Offside Rear Upper Stop lamp emits other than a steady red light |1.3.1b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Drive chain sprocket worn to excess |6.2.1e|1
Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Drive chain excessively loose |6.1.7 |c| |i||1
Offside Front Direction indicator insecure |1.5.3b|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Stop lamp insecure |1.3.3b|1
Upper Steering headbearing has excessive free play |2.2.2|1
Front Steering lock stop maladjusted |2.1.3|1
Lower Steering headbearing has excessive free play |2.2.2|1
Rear Rear suspension component seized |2.4A2a|ii||1
Stop lamp remains on when the brakes are released1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Footrest insecure |6.2.1a|1
Nearside Front Brake disc|s| has excessive run out |3.2.A1m|1
Offside Front Brake disc|s| has excessive run out |3.2.A1m|1
Brake lever insecure |3.1.2a|1
Headlamp aim beam image kick up to the offside |1.6|1
Rear Brake disc|s| cracked |3.2.A1g|1
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Direction indicator not working |1.5.1c|1
Rear Wheel spindle loose |5.2.1 |c| |i||1
Drive chain excessively tight |6.1.7 |k| |i||1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Brake hose excessively deteriorated1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Offside Indicator tell tale not functioning |1.5.2|1
Exhaust mounting missing |7.1.1c|1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Rear reflector missing (4.8.2 (a) (ii))1
Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Lower Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Brake lever mounting cracked |3.1.2c|1
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|1
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy