Most common failures | No# failures |
---|
Headlamp aim out of alignment | 51 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Registration plate issues | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
Drive chain excessively loose |6.2.1d| | 9 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Front Stop lamp missing |1.3.3a| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Front position lamp missing |1.1.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Steering headbearing has excessive free play (2.2.2) | 2 |
Front Floor brake test indicates a binding brake (3.3.C2c) | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen headlamp beam kick up is to the right,should be to the left. (4.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls rear brake control (4.3.2 (a) (iii)) | 1 |
Stop lamp adversely affected by the operation of another lamp stop lamp is affected when indicators are used (4.3.3 (b)) | 1 |
Position lamp adversely affected by the operation of another lamp front and rear position lamps are affected when indicators are used (4.2.3 (b)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Centre Rear Lower Rear reflector on motorcycle missing missing |1.4.1| | 1 |
Centre Front Rear reflector on motorcycle incorrectly positioned headlamp aim high |1.4.2d| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Offside Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Offside Front Upper Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Centre Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Rear shock absorber seal failed and leaking oil (2.4.A.1c) | 1 |
Nearside Front Brake disc(s) excessively scored (3.2.A1l) | 1 |
Nearside Front Brake disc(s) excessively worn (3.2.A1l) | 1 |
Throttle operating incorrectly (6.2.1f) | 1 |
Offside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Front Stop lamp does not emit a steady light (1.3.1b) | 1 |
Registration plate lamp issues | 1 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Rear Floor brake test indicates a binding brake (3.3.C2c) | 1 |
Offside Rear Footrest insecure (6.2.1a) | 1 |
Front Rear wheel rotation likely to be impeded (6.2.1b) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Indicator switch defective |1.5.4| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Centre Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Front wheel bearings are excessively tight |2.3.5b| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Rear Footrest missing can not be used (6.2.12 (a)) | 1 |
Offside Handlebar fouling on the fuel tank or bodywork on full lock fork leg (2.1.4 (b)) | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Shock absorber has a serious fluid leak Both forks (5.3.2 (b)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |