Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Horn not working |1.7.3a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Horn not working |1.7.3a| | 2 |
Front Wheel spoke excessively loose |4.2.1b| | 2 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
An item not tested |Manual| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp Illuminates when brakes applied |1.1.3b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Upper Throttle operating incorrectly |6.2.1f| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Horn sound not in accordance with requirements battery dead (7.7 (c)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied fouling on exhaust (1.1.2 (d)) | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Fuel cap sealing washer deteriorated seal cracked. |7.2.2c| | 1 |
Fuel system component leaking feul leaking from Carburetor. |7.2.1a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear All direction indicators not working both rear |4.4.1 |a| |ii|| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |