| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Drive chain excessively loose |6.2.1d| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Horn not working |1.7.3a| | 5 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Registration plate issues | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling n/s & off sde adjusters loose |2.4 |a|| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
| Offside Front Handlebar fouling on the fuel tank or bodywork on full lock Screen bracket fouling on fuel tank. |2.1.4 |b|| | 1 |
| Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket so loose it is likely to fail Sprocket inner bush`s worn to excess. |6.1.7 |c| |ii|| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp not working Front brake application (4.3.1 (a) (ii)) | 1 |
| Front Headlamp light intensity severely reduced Dip headlight wired incorrectly! (4.1.4 (a)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| An item not tested |Manual| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected incorrectly fitted (2.2.2 (f) (ii)) | 1 |
| Fork yoke insecure Top nut loose (2.2.2 (d) (i)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock Steering lock stops not engaging (2.1.4 (b)) | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Stop lamp not working when front brake is used (4.3.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Front suspension assembly component missing fork brace |2.3.1| | 1 |
| Front suspension assembly component loose top nut |2.3.1| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp main in dip position and dip in main position, now fixed |1.2.2c| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Brake back plate insecure split pin missing from back plate bolt (1.1.14 (d)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected engine increases rpm when steering is turned to the left (6.2.7 (a) (ii)) | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |