Most common failures | No# failures |
---|
Headlamp aim out of alignment | 29 |
Drive chain excessively loose |6.2.1d| | 19 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Horn not working |1.7.3a| | 5 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Headlamp insecure |1.2.3b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Front Stop lamp not working bulb and switch |4.3.1 |a| |ii|| | 1 |
Roller brake test indicates a binding brake rear |3.3.A1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Exhaust has part of the system missing noisy |7.1.1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Horn control defective |1.7.2a| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Registration plate issues | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake master cylinder severely damaged |3.2.B1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp not working Switch missing (4.3.1 (a) (ii)) | 1 |
Stop lamp switch with a delay in operation Requires excessive lever travel to operate light (4.3.2 (a) (ii)) | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Indicator tell tale not operating correctly |1.5.2| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Inner Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Offside Exhaust has a major leak of exhaust gases at front (6.1.2 (a)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake torque arm securing nut loose |6.2.1h| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Horn missing |1.7.1| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Brake component insecure Rear brake pedal loose. (1.1.21 (c)) | 1 |
Offside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |