| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 41 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Headlamp insecure |1.2.3b| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Registration plate issues | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| An item not tested |Manual| | 3 |
| Front Brake excessively binding (1.2.1 (f)) | 3 |
| Front Handlebar deformed |2.1.1b| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Wheel alignment incorrect which adversely affects the handling handling. (2.4 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the steering steering. (2.4 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls Front brake does not activate lamp (4.3.2 (a) (iii)) | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen grill over headlamp obstructing reflection |1.6.B.1| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Central Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Exhaust is leaking and excessively noisey Hole in down tube |7.1.1b| | 1 |
| Front Exhaust excessively deteriorated Hole in down tube |7.1.1a| | 1 |
| Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Offside Rear Brake back plate insecure torque arm split pin missing |1.1.14 |d|| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Throttle operating incorrectly sticks on right hand lock cable adjusted |6.2.1f| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Front Shock absorber likely to become detached |5.3.2 |a| |ii|| | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Brake performance unable to be tested Front brakes binding (1.2.1 (g)) | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Fork yoke deformed |2.1.1b| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Centre Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Centre Headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle opens when bars are turned. (6.2.7 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake component insecure Split pin missing from rear torque arm (1.1.21 (c)) | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |