>

MOT History from tests of petrol HONDA CB250s year 1994

Review the list of common HONDA CB250 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:79.88%
(The average a petrol HONDA CB250 year 1994 passes without issue)
Based on:850 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment17
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Drive chain worn to excess |6.2.1e|10
Front Roller brake test indicates a binding brake |3.3.A1a|10
Drive chain excessively loose |6.2.1d|8
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Nearside Front shock absorber seal failed and leaking oil |2.3.3|8
Rear Drive chain sprocket worn to excess |6.2.1e|7
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|6
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Steering headbearing has excessive free play |2.2.2|6
Steering movement excessively `notchy` with the wheel raised |2.2.1b|6
Exhaust is leaking and excessively noisey |7.1.1b|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|5
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Front Brake disc|s| excessively worn |3.2.A1l|4
Registration plate issues4
Rear Drive chain excessively loose |6.2.1d|4
Throttle operating incorrectly |6.2.1f|4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Front Floor brake test indicates a binding brake |3.3.C2c|3
Direction indicators not working |1.5.1c|3
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Front wheel bearings have excessive free play |2.3.5b|3
Rear wheel rotation likely to be impeded |6.2.1b|3
Horn not working |1.7.3a|3
Drive chain excessively tight |6.2.1d|3
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Nearside Rear Footrest missing |6.2.1a|3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Handlebar deformed |2.1.1b|2
Steering movement excessively stiff with the wheel raised |2.2.1b|2
Front wheel bearings are excessively rough |2.3.5b|2
Rear Drive chain sprocket carrier worn to excess |6.2.1e|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Brake lever cannot be applied smoothly |3.1.3d|2
Exhaust excessively deteriorated |7.1.1a|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Headlamp aim beam image kick up to the offside |1.6|2
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Brake locking device missing |3.2.A1e|1
Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Front Brake component is excessively corroded |3.1.5|1
Brake component is excessively corroded |3.1.5|1
Front Brake disc|s| cracked |3.2.A1g|1
Rear Valve stem seriously damaged |5.2.3 |j||1
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Front Brake excessively binding (1.2.1 (f))1
Front Horn not working (7.7 (a) (ii))1
Stop lamp remains on when the brakes are released1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Brake disc|s| excessively scored |3.2.A1l|1
Rear reflector on motorcycle missing |1.4.1|1
Footrest insecure |6.2.1a|1
Front Direction indicator not working |1.5.1c|1
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Fuel hose leaking |6.1.3 |b| |i||1
Drive chain sprocket worn to excess |6.2.1e|1
Drive chain sprocket carrier worn to excess |6.2.1e|1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front suspension assembly component missing |2.3.1|1
Offside Throttle operating incorrectly |6.2.1f|1
Offside Rear Direction indicator not working |1.5.1c|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Front Direction indicator not working |1.5.1c|1
Centre Rear Rear position lamp deteriorated and function impaired |1.1.1b|1
Nearside Direction indicators not working |1.5.1c|1
Rear wheel spindle loose |2.4.A.2b|1
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear Stop lamp does not emit a steady light |1.3.1b|1
Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Motorcycle structure excessively corroded |6.1.1a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Rear suspension component loose |2.4.A.1a|1
Offside Rear Footrest missing (6.2.12 (a))1
Headlamp insecure |1.2.3b|1
Rear Drive chain excessively tight |6.2.1d|1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Brake reaction bracket insecure |3.2.A1j|1
Front Exhaust excessively deteriorated |7.1.1a|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Brake pedal has inadequate reserve travel |3.1.3b|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Footrest missing |6.2.1a|1
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j|1
Nearside Rear Brake component leaking fluid |3.2.B4|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Front Floor brake test indicates a severely grabbing brake |3.3.C2d|1
Front Brake hose which buldges |3.2.B4|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Nearside Front Direction indicators not working |1.5.1c|1
Nearside Rear Direction indicators not working |1.5.1c|1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Nearside Rear Direction indicator not working |1.5.1c|1
Brake locking device missing Brake drum arm |3.2.A1e|1
Throttle operating incorrectly Throttle sticking on offside lock |6.2.1f|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii))1
Stop lamp not working (4.3.1 (a) (ii))1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Headlamp aim beam image too far to the right |1.6.4|1
Direction indicators not working all indicators. |1.5.1c|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear wheel spindle securing nut locking device missing |2.4.A.2b|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Position lamp not working (4.2.1 (a))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Direction indicator not working |1.5.1c|1
Offside Footrest insecure (6.2.12 (a))1
Front Front suspension assembly component excessively misaligned |2.3.1|1
Offside Rear Footrest missing |6.2.1a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Central Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy