| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 18 |
| Registration plate issues | 10 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Headlamp aim unable to be tested inoperative (4.1.2 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Fuel cap missing |6.1.3 |b| |i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Brake hose excessively deteriorated | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Centre Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Throttle operating incorrectly Not self closing |6.2.1f| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Direction indicators not working all four |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Brake lever has insufficient reserve travel moved with adjuster on lever (1.1.2 (a)) | 1 |
| Direction indicator flashing more than 120 times per minute All |1.5.1c| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |