>

MOT History from tests of petrol HONDA CB1s year 1991

Review the list of common HONDA CB1 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:81.11%
(The average a petrol HONDA CB1 year 1991 passes without issue)
Based on:503 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment18
Rear reflector on motorcycle missing |1.4.1|11
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Rear wheel bearings have excessive free play |2.4.A.2c|7
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Rear shock absorber has inadequate damping effect. |2.4.A.3b|5
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Offside Front shock absorber seal failed and leaking oil |2.3.3|5
Front wheel bearings have excessive free play |2.3.5b|4
Steering headbearing has excessive free play |2.2.2|4
Horn not working |1.7.3a|4
Front Roller brake test indicates a binding brake |3.3.A1a|4
Offside Front Footrest insecure |6.2.1a|4
Drive chain excessively loose |6.2.1d|4
Registration plate issues3
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Front wheel bearings are excessively rough |2.3.5b|3
Offside Rear Direction indicator not working |1.5.1c|2
Headlamp insecure |1.2.3b|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Rear Brake disc|s| excessively worn |3.2.A1l|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|2
Nearside Rear Direction indicators not working |1.5.1c|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Drive chain excessively tight |6.2.1d|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Offside Footrest insecure |6.2.1a|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Drive chain worn to excess |6.2.1e|2
Rear Drive chain sprocket worn to excess |6.2.1e|2
Fuel system component leaking |7.2.1a|2
Rear Brake master cylinder fluid level dangerously low |3.2.B1d|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Headlamp deteriorated and function impaired |1.2.3a|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Stop lamp not working (4.3.1 (a) (ii))1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Stop lamp does not illuminate by the operation of both brake controls Front brake switch (4.3.2 (a) (iii))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))1
Horn not working (7.7 (a))1
Footrest insecure L/H retaining pin missing (6.2.12 (a))1
Front Brake disc significantly and obviously worn warped (1.1.14 (a) (i))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Nearside Rear Footrest insecure |6.2.1a|1
Nearside Front Footrest insecure |6.2.1a|1
Offside Rear Footrest insecure |6.2.1a|1
Rear Brake pedal insecure |3.1.2a|1
Offside Rear Direction indicators not working |1.5.1c|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Shock absorber has a serious fluid leak right side fork seal leaking |5.3.2 |b||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Throttle operating incorrectly (6.2.7 (a) (i))1
Nearside Front Direction indicators not working |1.5.1c|1
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Throttle operating incorrectly |6.2.1f|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Upper Handlebar deformed |2.1.1b|1
Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b|1
Rear Drive chain excessively loose |6.2.1d|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Rear Brake disc|s| cracked |3.2.A1g|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Rear suspension component excessively corroded. |2.4.A.1a|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Direction indicator incorrect colour |1.5.1b|1
Offside Direction indicator flashing more than 120 times per minute |1.5.1c|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Headlamp insecure |1.2.3b|1
Nearside Footrest insecure |6.2.1a|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Nearside Drive chain excessively loose |6.2.1d|1
Rear Brake excessively binding (1.2.1 (f))1
Front Stop lamp does not illuminate immediately a brake applies front brake switch inop switch replaced |1.3.1a|1
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Fuel system component insecure |7.2.1b|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Brake master cylinder fluid level dangerously low |3.2.B1d|1
Front position lamp incorrect colour |1.1.2a|1
Throttle operating incorrectly throttle sticks open |6.2.1f|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Indicator tell tale not functioning |1.5.2|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Nearside Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Position lamp not working |4.2.1 |a||1
Front shock absorber seal failed and leaking oil |2.3.3|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy