| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 30 |
| Drive chain excessively loose |6.2.1d| | 11 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Registration plate issues | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Shock absorber has a serious fluid leak front forks leaking fluid to excess (5.3.2 (b)) | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Direction indicators affected by the operation of another lamp both rear flashing amber an red |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Rear suspension bearing has excessive free play SWING ARM BEARINGS |2.4.A2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Offside Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake caliper|s| insecure |3.2.A1j| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Suspension component pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Front mudguard insecure |2.3.7| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front Front wheel spindle loose |2.3.5a| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Brake hose fouling |3.2.B3b| | 1 |
| Direction indicators not working all |1.5.1c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Brake lever pivots excessively worn |3.1.3a| | 1 |
| Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
| Front Brake hose leaking |1.1.12 |c|| | 1 |
| Brake locking device missing rear brake caliper pin |3.2.A1e| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |