Most common failures | No# failures |
---|
Headlamp aim out of alignment | 45 |
Drive chain excessively loose |6.2.1d| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front suspension has inadequate damping effect. |2.3.6c| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Registration plate issues | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front suspension assembly component loose |2.3.1| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Centre Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Motorcycle structure excessively corroded o/s rear frame lower down tube corroded and holed. |6.1.1a| | 1 |
Rear suspension bush has excessive free play Lower arm. |2.4.A2a|i|| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear reflector on motorcycle missing Not showing red in colour. |1.4.1| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Rear suspension bearing has excessive free play Linkage |2.4.A2a|i|| | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Shock absorber has negligible damping effect REAR SUSPENSION COMPLETELY SEIZED |5.3.2 |b|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp missing |1.2.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Horn sound not in accordance with requirements Too quiet to be heard by other road users (7.7 (c)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Vehicle identification number not legible |0.2 |b|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
Rear Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
Road spring corroded so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Upper Motorcycle structure cracked |6.1.1a| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Upper Handlebar deformed |2.1.1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Front Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
An item not tested |Manual| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Rear anchor arm split pin missing from hub bolt |6.2.1h| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Centre Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Brake hose excessively deteriorated | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp does not illuminate immediately a brake applies f/ brake light switch inoperative |1.3.1a| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Brake hose damaged | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |