| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 47 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Registration plate issues | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Drive chain excessively tight |6.2.1d| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Headlamp insecure |1.2.3b| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Rear Drive chain worn to excess |6.2.1e| | 4 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Offside Rear Footrest missing |6.2.1a| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front position lamp insecure |1.1.1c| | 3 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear Direction indicators not working |1.5.1c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Front position lamp damaged and function impaired |1.1.1b| | 2 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Rear Footrest missing (6.2.12 (a)) | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Centre Rear Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest missing |6.2.1a| | 1 |
| Offside Front Horn not working (7.7 (a)) | 1 |
| Centre Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen projected beam image incorrect |4.1.2 |a|| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Offside Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Horn missing |1.7.1| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front Indicator switch insecure |1.5.4| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear mono-shock pivot excessively worn lower shock linkage |2.4.B.4| | 1 |
| Stop lamp does not illuminate immediately a brake applies from rear brake |switch not connected to pedal| |1.3.1a| | 1 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Centre Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Lower Footrest insecure (6.2.12 (a)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Central Rear Lower Shock absorber insecurely attached no bushing and bolt loose (5.3.2 (a) (i)) | 1 |
| Central Rear Lower Suspension rod attachment bracket/mounting insecure linkage bolts loose (5.3.3 (a) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment rear cam arm pulling overcentre |3.2.A1i| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Brake component insecure Rear brake torque arm incorrectly fitted |1.1.21 |c|| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Headlamp aim headlamp damaged and function impaired no beam pattern |1.2.3a| | 1 |
| Fuel system component leaking excessively or a risk of fire at fuel tap (6.1.3 (b) (ii)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Fuel system component insecure |7.2.1b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Shock absorber has a serious fluid leak left front fork (5.3.2 (b)) | 1 |
| Shock absorber has a serious fluid leak right front fork (5.3.2 (b)) | 1 |
| Front Forks in such a condition that steering control is adversely affected no fork oil suspected ...forks bottoming out (2.2.2 (d) (ii)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Rear Rear reflector on motorcycle missing (1.4.1) | 1 |