Most common failures | No# failures |
---|
Headlamp aim out of alignment | 59 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Registration plate issues | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 5 |
Horn not working |1.7.3a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Front Horn not working |1.7.3a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Offside Footrest insecure |6.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Brake hose damaged | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Direction indicators not working intermittent fault & insecure |1.5.1c| | 1 |
Indicator switch insecure nearside switch cluster insecure |1.5.4| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Fork yoke deformed |2.1.1b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Roller brake test indicates excessive fluctuation of brake effort Front |3.3.A1d| | 1 |
Horn missing |1.7.1| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Clutch lever positioned so it cannot be readily operated |6.2.7 |b|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front Brake lever attachment screws missing |3.1.2b| | 1 |
Offside Front Lower Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Centre Rear Lower Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Upper Shock absorber likely to become detached locking nut loose (5.3.2 (a) (ii)) | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake hose leaking fluid |3.2.B4| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Headlamp switch insecure |1.2.4| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Rear Footrest missing n/s+o/s (6.2.12 (a)) | 1 |
Offside Handlebar grip insecure to handlebar switch gear loose (2.2.1 (d) (ii)) | 1 |
Offside Front Footrest insecure locking nut missing (6.2.12 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front All direction indicators not working the left front indicator was not working. repaired (4.4.1 (a) (ii)) | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Steering headbearing excessively stiff or notchy Steering self centers |2.2.2 |f| |i|| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear axle locking pin |6.2.1h| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Wheel spindle loose no split pin fitted rear spindle |5.2.1 |c| |i|| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear All position lamps do not illuminate immediately when switched on light
|1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a| | 1 |
Front suspension has inadequate damping effect. both front shocks weak |2.3.6c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Brake reaction bracket insecure split pin missing |3.2.A1j| | 1 |
Brake reaction bracket insecure securing pin missing |3.2.A1j| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |