| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 29 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Horn not working |1.7.3a| | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Registration plate issues | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Brake hose excessively deteriorated | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Brake performance not tested |3.3| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
| Centre Fuel system component leaking |7.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Brake disc contaminated oil on disc |1.1.14 |b|| | 1 |
| Steering operation restricted in free movement from lock to lock Large notch in centre of bearings |2.1.4 |c|| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Centre Rear Drive chain excessively tight |6.2.1d| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Front position lamp does not face the front |1.1.1d| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Outer Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Fuel hose leaking |7.2.1a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Fuel system component leaking |7.2.1a| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear An item not tested |Manual| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Fuel system component leaking |7.2.1a| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Inner Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front Upper Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Front Front wheel spindle loose |2.3.5a| | 1 |
| Offside Front Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride reaction bracket |6.2.1h| | 1 |
| Steering lock stop maladjusted |2.1.3| | 1 |
| Footrest insecure all with no split pin |6.2.1a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake pivot has restricted free movement wrong bolt fitted no locking s/pin (1.1.15 (e)) | 1 |
| Front Brake caliper inadequately mounted bolt missing (1.1.16 (c) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Brake component insecure split pin missing from rear brake torque arm (1.1.21 (c)) | 1 |
| Nearside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Brake hose excessively kinked |3.2.B3a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |