Most common failures | No# failures |
---|
Headlamp aim out of alignment | 18 |
Registration plate issues | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Stop lamp deteriorated and function impaired switch faulty |1.3.3a| | 1 |
Rear Floor brake test indicates a sticking brake sticks on when brake is released |3.3.C2c| | 1 |
Brake locking device missing torque arm split pin missing |3.2.A1e| | 1 |
Brake component has an inadequate repair torque arm fitted incorrectly |3.1.5| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
All direction indicators not working all four |4.4.1 |a| |ii|| | 1 |
Stop lamp not working from operation of front switch. |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Registration plate lamp issues | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Fuel system component leaking carb (6.1.3 (b) (i)) | 1 |
Handlebar restricted in free movement from lock to lock pulls throttle (2.1.4 (c)) | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Indicator switch defective Indicator switch not readily available, and intermittently working. |1.5.4| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake rod insecure (1.1.15 (c)) | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear reflector likely to become detached |4.8.1 |b| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake locking device missing Brake Arm Bolt |3.2.A1e| | 1 |
Rear Brake locking device missing Split Pin |3.2.A1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Split Link |6.2.1h| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Headlamp aim beam image too far to the left |1.6.4| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Position lamp not working Front position lamp not working (4.2.1 (a)) | 1 |
Front Brake excessively binding Front brake binding (1.2.1 (f)) | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure split pin missing |6.1.1 |b| |i|| | 1 |
Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |