MOT History from tests of petrol HONDA C90s year 1995

Review the list of common HONDA C90 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:82.69%

(The average a petrol HONDA C90 year 1995 passes without issue)

Based on:3,292 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	69
Drive chain excessively loose \|6.2.1d\|	29
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	28
Horn not working \|1.7.3a\|	26
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	24
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	22
Exhaust is leaking and excessively noisey \|7.1.1b\|	18
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	17
Registration plate issues	17
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	16
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	14
Horn not loud enough to be heard by another road user \|1.7.3a\|	14
Front Brake lever has inadequate reserve travel \|3.1.3b\|	12
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	12
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Rear Wheel spoke excessively loose \|4.2.1b\|	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Front Stop lamp remains on when the brake is released \|1.3.1e\|	10
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	10
Drive chain excessively tight \|6.2.1d\|	10
Front Roller brake test indicates a binding brake \|3.3.A1a\|	10
Nearside Rear Direction indicator insecure \|1.5.3b\|	9
Direction indicators affected by the operation of another lamp \|1.5.1c\|	9
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	8
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	8
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	8
Brake lever has inadequate reserve travel \|3.1.3b\|	7
Rear Motorcycle structure excessively corroded \|6.1.1a\|	7
Steering headbearing has excessive free play \|2.2.2\|	7
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Headlamp switch faulty \|1.2.4\|	7
Rear Position lamp not working (4.2.1 (a))	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Rear Brake locking device missing \|3.2.A1e\|	7
Offside Rear Direction indicator insecure \|1.5.3b\|	7
Front Wheel spoke excessively loose \|4.2.1b\|	7
Brake pedal has inadequate reserve travel \|3.1.3b\|	6
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	6
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	6
Drive chain worn to excess \|6.2.1e\|	6
Direction indicators not working \|1.5.1c\|	6
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Stop lamp remains on when the brakes are released	5
Handlebar mounting clamp loose \|2.1.1a\|	5
Nearside Rear Direction indicator not working \|1.5.1c\|	5
Rear Brake reaction bracket insecure \|3.2.A1j\|	5
Riders seat insecure \|6.2.1a\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	4
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	4
Exhaust excessively deteriorated \|7.1.1a\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Headlamp not working on main beam (4.1.1 (a) (ii))	3
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Front suspension assembly component excessively bent \|2.3.1\|	3
Throttle operating incorrectly \|6.2.1f\|	3
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear reflector on motorcycle missing \|1.4.1\|	3
Nearside Rear Direction indicator missing \|1.5.1a\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Front suspension assembly component excessively misaligned \|2.3.1\|	3
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	3
Headlamp aim not tested \|1.6\|	3
Front Motorcycle structure excessively damaged \|6.1.1a\|	3
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Horn not working \|7.7 \|a\| \|ii\|\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Direction indicator not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	3
Nearside Rear Footrest missing \|6.2.1a\|	2
Nearside Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	2
Chain guard insecure \|6.2.1c\|	2
Nearside Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Brake pedal cannot be applied smoothly \|3.1.3d\|	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Offside Rear Direction indicator missing \|1.5.1a\|	2
Rear wheel insecure \|4.2.3b\|	2
Leg shield insecure and likely to impede the steering \|2.1.2e\|	2
Handlebar deformed \|2.1.1b\|	2
Rear Wheel spoke excessively corroded \|4.2.1b\|	2
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Horn sounds harsh or grating \|1.7.3c\|	2
Headlamp aim not tested (4.1.2 (b))	2
Horn control defective \|1.7.2a\|	2
Headlamp insecure (4.1.1 (c))	2
Horn not working (7.7 (a) (ii))	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Handlebar mounting clamp bolt loose \|2.1.1a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	2
Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	2
Front Footrest insecure \|6.2.1a\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Front Exhaust excessively deteriorated \|7.1.1a\|	2
Rear Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Brake pedal pivots excessively worn \|3.1.3a\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Direction indicator missing \|1.5.1a\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Front wheel spindle securing nut locking device missing \|2.3.3a\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Motorcycle structure excessively corroded \|6.1.1a\|	2
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front wheel spindle loose \|2.3.5a\|	2
Rear Direction indicator insecure \|1.5.3b\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Inner Rear Motorcycle structure excessively corroded \|6.1.1a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Rear Wheel spoke excessively loose (5.2.2 (d))	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	2
Registration plate lamp issues	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Horn is not continous or uniform \|1.7.3c\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Rear Footrest missing \|6.2.1a\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Rear Drive chain sprocket worn to excess \|6.2.1e\|	2
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	69
Drive chain excessively loose \|6.2.1d\|	29
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	28
Horn not working \|1.7.3a\|	26
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	24
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	22
Exhaust is leaking and excessively noisey \|7.1.1b\|	18
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	17
Registration plate issues	17
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	16
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	14
Horn not loud enough to be heard by another road user \|1.7.3a\|	14
Front Brake lever has inadequate reserve travel \|3.1.3b\|	12
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	12
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Rear Wheel spoke excessively loose \|4.2.1b\|	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	10
Front Stop lamp remains on when the brake is released \|1.3.1e\|	10
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	10
Drive chain excessively tight \|6.2.1d\|	10
Front Roller brake test indicates a binding brake \|3.3.A1a\|	10
Nearside Rear Direction indicator insecure \|1.5.3b\|	9
Direction indicators affected by the operation of another lamp \|1.5.1c\|	9
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Front wheel bearings have excessive free play \|2.3.5b\|	8
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	8
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	8
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	8
Brake lever has inadequate reserve travel \|3.1.3b\|	7
Rear Motorcycle structure excessively corroded \|6.1.1a\|	7
Steering headbearing has excessive free play \|2.2.2\|	7
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Headlamp switch faulty \|1.2.4\|	7
Rear Position lamp not working (4.2.1 (a))	7
Rear wheel bearings have excessive free play \|2.4.A.2c\|	7
Rear Brake locking device missing \|3.2.A1e\|	7
Offside Rear Direction indicator insecure \|1.5.3b\|	7
Front Wheel spoke excessively loose \|4.2.1b\|	7
Brake pedal has inadequate reserve travel \|3.1.3b\|	6
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	6
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Front Front wheel bearings have excessive free play \|2.3.5b\|	6
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	6
Drive chain worn to excess \|6.2.1e\|	6
Direction indicators not working \|1.5.1c\|	6
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Stop lamp remains on when the brakes are released	5
Handlebar mounting clamp loose \|2.1.1a\|	5
Nearside Rear Direction indicator not working \|1.5.1c\|	5
Rear Brake reaction bracket insecure \|3.2.A1j\|	5
Riders seat insecure \|6.2.1a\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	4
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	4
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	4
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	4
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	4
Exhaust excessively deteriorated \|7.1.1a\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Front Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	3
Headlamp not working on main beam (4.1.1 (a) (ii))	3
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	3
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	3
Nearside Front Direction indicator flashing less than 60 times a minute \|1.5.1c\|	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
Floor brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.C1b\|	3
Front Front suspension assembly component excessively bent \|2.3.1\|	3
Throttle operating incorrectly \|6.2.1f\|	3
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Rear reflector on motorcycle missing \|1.4.1\|	3
Nearside Rear Direction indicator missing \|1.5.1a\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	3
Front suspension assembly component excessively misaligned \|2.3.1\|	3
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	3
Headlamp aim not tested \|1.6\|	3
Front Motorcycle structure excessively damaged \|6.1.1a\|	3
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	3
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Horn not working \|7.7 \|a\| \|ii\|\|	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Direction indicator not working \|1.5.1c\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	3
Nearside Rear Footrest missing \|6.2.1a\|	2
Nearside Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced \|6.1.1 \|c\| \|i\|\|	2
Chain guard insecure \|6.2.1c\|	2
Nearside Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Nearside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Offside Front Direction indicator flashing more than 120 times per minute \|1.5.1c\|	2
Front Horn not loud enough to be heard by another road user \|1.7.3a\|	2
Rear Rear reflector on motorcycle missing \|1.4.1\|	2
Rear Brake pedal cannot be applied smoothly \|3.1.3d\|	2
Front Floor brake test indicates a binding brake \|3.3.C2c\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Front Stop lamp not working (4.3.1 (a) (ii))	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear wheel spindle loose \|2.4.A.2b\|	2
Offside Rear Direction indicator missing \|1.5.1a\|	2
Rear wheel insecure \|4.2.3b\|	2
Leg shield insecure and likely to impede the steering \|2.1.2e\|	2
Handlebar deformed \|2.1.1b\|	2
Rear Wheel spoke excessively corroded \|4.2.1b\|	2
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	2
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Horn sounds harsh or grating \|1.7.3c\|	2
Headlamp aim not tested (4.1.2 (b))	2
Horn control defective \|1.7.2a\|	2
Headlamp insecure (4.1.1 (c))	2
Horn not working (7.7 (a) (ii))	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Handlebar mounting clamp bolt loose \|2.1.1a\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Brake linkage has abnormal movement due to maladjustment \|3.2.A1i\|	2
Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	2
Front Footrest insecure \|6.2.1a\|	2
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Brake excessively binding (1.2.1 (f))	2
Front Exhaust excessively deteriorated \|7.1.1a\|	2
Rear Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Brake pedal pivots excessively worn \|3.1.3a\|	2
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Nearside Front Direction indicator missing \|1.5.1a\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Front wheel spindle securing nut locking device missing \|2.3.3a\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Motorcycle structure excessively corroded \|6.1.1a\|	2
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front wheel spindle loose \|2.3.5a\|	2
Rear Direction indicator insecure \|1.5.3b\|	2
Floor brake test No brake control achieves an efficiency of 30%. \|3.3.C1a\|	2
Inner Rear Motorcycle structure excessively corroded \|6.1.1a\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	2
Rear Wheel spoke excessively loose (5.2.2 (d))	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	2
Front Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	2
Rear shock absorber insecurely mounted \|2.4.A.3b\|	2
Front Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	2
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	2
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Brake pedal has insufficient reserve travel \|1.1.2 \|a\|\|	2
Registration plate lamp issues	2
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Horn is not continous or uniform \|1.7.3c\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Rear Footrest missing \|6.2.1a\|	2
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	2
Rear Drive chain sprocket worn to excess \|6.2.1e\|	2
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	2

MOT History from tests of petrol HONDA C90s year 1995

Find us on Facebook