MOT History from tests of petrol HONDA C90s year 1987

Review the list of common HONDA C90 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:78.41%

(The average a petrol HONDA C90 year 1987 passes without issue)

Based on:4,396 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	126
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	58
Drive chain excessively loose \|6.2.1d\|	44
Steering headbearing has excessive free play \|2.2.2\|	37
Horn not working \|1.7.3a\|	37
Registration plate issues	34
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	29
Rear Wheel spoke excessively loose \|4.2.1b\|	28
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	27
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	26
Front Brake lever has inadequate reserve travel \|3.1.3b\|	25
Direction indicators affected by the operation of another lamp \|1.5.1c\|	25
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	24
Exhaust is leaking and excessively noisey \|7.1.1b\|	24
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	23
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	22
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	22
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	18
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	17
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	16
Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	16
Rear Motorcycle structure excessively corroded \|6.1.1a\|	16
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	16
Front wheel spindle securing nut locking device missing \|2.3.3a\|	15
Offside Rear Direction indicator insecure \|1.5.3b\|	15
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	14
Nearside Rear Direction indicator insecure \|1.5.3b\|	14
Direction indicators not working \|1.5.1c\|	13
Drive chain worn to excess \|6.2.1e\|	13
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	12
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Front Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	12
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	12
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	11
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Throttle operating incorrectly \|6.2.1f\|	11
Brake pedal has inadequate reserve travel \|3.1.3b\|	11
Rear Brake reaction bracket insecure \|3.2.A1j\|	11
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	10
Drive chain excessively tight \|6.2.1d\|	10
Riders seat insecure \|6.2.1a\|	10
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	9
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	9
Rear Brake locking device missing \|3.2.A1e\|	9
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	8
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	8
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	8
Front Stop lamp remains on when the brake is released \|1.3.1e\|	8
Horn not working (7.7 (a) (ii))	8
Horn not working \|7.7 \|a\| \|ii\|\|	8
Rear wheel bearings have excessive free play \|2.4.A.2c\|	8
Rear Brake pedal pivots excessively worn \|3.1.3a\|	8
Brake lever has inadequate reserve travel \|3.1.3b\|	8
Nearside Rear Direction indicator not working \|1.5.1c\|	8
Handlebar mounting clamp bolt loose \|2.1.1a\|	8
Front Steering linkage has excessive free play \|2.2.2\|	8
Direction indicator affected by the operation of another lamp \|1.5.1c\|	7
Headlamp switch faulty \|1.2.4\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Headlamp aim not tested \|1.6\|	7
Offside Rear Direction indicator not working \|1.5.1c\|	7
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	7
Front Steering headbearing has excessive free play \|2.2.2\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	7
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Front Brake lever cannot be applied smoothly \|3.1.3d\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Nearside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	6
Offside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	6
Offside Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	6
Handlebar mounting clamp loose \|2.1.1a\|	6
Rear Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	6
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Direction indicator not working \|1.5.1c\|	5
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	5
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Horn is not a constant note \|1.7.3c\|	5
Nearside Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	5
Nearside Front Footrest insecure \|6.2.1a\|	5
Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
All position lamps adversely affected by the operation of the horn \|1.1.3b\|	5
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Nearside Rear Footrest missing \|6.2.1a\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Rear Wheel spoke missing \|4.2.1b\|	5
Headlamp dipped beam affected by the operation of the horn \|1.2.2c\|	5
Nearside Front Direction indicator not working \|1.5.1c\|	5
Front Wheel spoke excessively loose \|4.2.1b\|	5
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	5
Offside Rear Motorcycle structure excessively corroded \|6.1.1a\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Offside Rear Rear shock absorber insecurely mounted \|2.4.A.3b\|	4
Rear Direction indicator not working \|1.5.1c\|	4
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	4
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	4
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))	4
Rear reflector missing (4.8.2 (a) (ii))	4
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	4
Motorcycle structure excessively corroded \|6.1.1a\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
Rear Direction indicator insecure \|1.5.3b\|	4
Nearside Footrest insecure \|6.2.1a\|	4
Offside Footrest insecure \|6.2.1a\|	4
Stop lamp remains on when the brakes are released	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Offside Front Footrest insecure \|6.2.1a\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Steering linkage has excessive free play \|2.2.2\|	4
Offside Front Direction indicator not working \|1.5.1c\|	4
Rear Position lamp not working (4.2.1 (a))	4
Rear Position lamp not working \|4.2.1 \|a\|\|	4
Front Direction indicator not working \|1.5.1c\|	4
All position lamps not working (4.2.1 (a))	4
Front Position lamp not working (4.2.1 (a))	4
Offside Rear Direction indicators not working \|1.5.1c\|	4
Fuel system component leaking \|7.2.1a\|	4
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	3
Rear Chain guard insecure \|6.2.1c\|	3
Front Footrest insecure \|6.2.1a\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Front Brake cable excessively corroded \|3.2.A1b\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Rear Footrest missing \|6.2.1a\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Offside Front Direction indicators not working \|1.5.1c\|	3
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	3
Rear Wheel spoke cracked. \|4.2.1b\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Rear Wheel spoke excessively bent \|4.2.1b\|	3
An item not tested \|Manual\|	3
Horn sounds harsh or grating \|1.7.3c\|	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	3
Nearside Front Lower Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Lower Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Front suspension assembly component excessively misaligned \|2.3.1\|	3
Stop lamp not working (4.3.1 (a) (ii))	3
Headlamp main beam affected by the operation of the horn \|1.2.2c\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Central Front Upper Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Headlamp insecure \|1.2.3b\|	3
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	3
Front Front wheel spindle securing nut locking device missing \|2.3.5a\|	3
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	3
All direction indicators not working (4.4.1 (a) (ii))	3
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	3
Front Front mudguard insecure \|2.3.7\|	3
Offside Rear Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	3
Horn is not continous or uniform \|1.7.3c\|	3
Front Stop lamp not working (4.3.1 (a) (ii))	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Front wheel spindle securing nut locking device missing \|2.3.5a\|	3
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear Wheel bearing has excessive play (5.1.3 (a) (i))	3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	126
Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	58
Drive chain excessively loose \|6.2.1d\|	44
Steering headbearing has excessive free play \|2.2.2\|	37
Horn not working \|1.7.3a\|	37
Registration plate issues	34
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	29
Rear Wheel spoke excessively loose \|4.2.1b\|	28
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	27
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	26
Front Brake lever has inadequate reserve travel \|3.1.3b\|	25
Direction indicators affected by the operation of another lamp \|1.5.1c\|	25
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	24
Exhaust is leaking and excessively noisey \|7.1.1b\|	24
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	23
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	22
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	22
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	21
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Horn not loud enough to be heard by another road user \|1.7.3a\|	18
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	18
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	17
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	16
Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	16
Rear Motorcycle structure excessively corroded \|6.1.1a\|	16
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	16
Front wheel spindle securing nut locking device missing \|2.3.3a\|	15
Offside Rear Direction indicator insecure \|1.5.3b\|	15
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	14
Nearside Rear Direction indicator insecure \|1.5.3b\|	14
Direction indicators not working \|1.5.1c\|	13
Drive chain worn to excess \|6.2.1e\|	13
Front Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	12
Stop lamp affected by the operation of another lamp \|1.3.2\|	12
Front Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	12
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	12
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	11
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Throttle operating incorrectly \|6.2.1f\|	11
Brake pedal has inadequate reserve travel \|3.1.3b\|	11
Rear Brake reaction bracket insecure \|3.2.A1j\|	11
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	10
Drive chain excessively tight \|6.2.1d\|	10
Riders seat insecure \|6.2.1a\|	10
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	9
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	9
Rear Brake locking device missing \|3.2.A1e\|	9
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	8
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	8
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	8
Front Stop lamp remains on when the brake is released \|1.3.1e\|	8
Horn not working (7.7 (a) (ii))	8
Horn not working \|7.7 \|a\| \|ii\|\|	8
Rear wheel bearings have excessive free play \|2.4.A.2c\|	8
Rear Brake pedal pivots excessively worn \|3.1.3a\|	8
Brake lever has inadequate reserve travel \|3.1.3b\|	8
Nearside Rear Direction indicator not working \|1.5.1c\|	8
Handlebar mounting clamp bolt loose \|2.1.1a\|	8
Front Steering linkage has excessive free play \|2.2.2\|	8
Direction indicator affected by the operation of another lamp \|1.5.1c\|	7
Headlamp switch faulty \|1.2.4\|	7
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	7
Headlamp aim not tested \|1.6\|	7
Offside Rear Direction indicator not working \|1.5.1c\|	7
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	7
Front Steering headbearing has excessive free play \|2.2.2\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	7
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	6
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	6
Front Brake lever cannot be applied smoothly \|3.1.3d\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Nearside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	6
Offside Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	6
Offside Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	6
Handlebar mounting clamp loose \|2.1.1a\|	6
Rear Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	6
Front Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	6
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	6
Direction indicator not working \|1.5.1c\|	5
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	5
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Horn is not a constant note \|1.7.3c\|	5
Nearside Front suspension assembly has excessive free play in the pivot bearings. \|2.3.2\|	5
Nearside Front Footrest insecure \|6.2.1a\|	5
Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	5
All position lamps adversely affected by the operation of the horn \|1.1.3b\|	5
Stop lamp remains on when the brake is released \|1.3.1e\|	5
Nearside Rear Footrest missing \|6.2.1a\|	5
Offside Rear Footrest missing \|6.2.1a\|	5
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	5
Headlamp not working on dipped beam (4.1.1 (a) (ii))	5
Rear Wheel spoke missing \|4.2.1b\|	5
Headlamp dipped beam affected by the operation of the horn \|1.2.2c\|	5
Nearside Front Direction indicator not working \|1.5.1c\|	5
Front Wheel spoke excessively loose \|4.2.1b\|	5
Headlamp not working on dipped beam \|4.1.1 \|a\| \|ii\|\|	5
Offside Rear Motorcycle structure excessively corroded \|6.1.1a\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Front Brake lever cannot be released smoothly \|3.1.3d\|	4
Direction indicator flashing less than 60 times a minute \|1.5.1c\|	4
Offside Rear Rear shock absorber insecurely mounted \|2.4.A.3b\|	4
Rear Direction indicator not working \|1.5.1c\|	4
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	4
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	4
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	4
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))	4
Rear reflector missing (4.8.2 (a) (ii))	4
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	4
Motorcycle structure excessively corroded \|6.1.1a\|	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Offside Rear Direction indicator damaged and function impaired \|1.5.3a\|	4
Rear Direction indicator insecure \|1.5.3b\|	4
Nearside Footrest insecure \|6.2.1a\|	4
Offside Footrest insecure \|6.2.1a\|	4
Stop lamp remains on when the brakes are released	4
Rear reflector on motorcycle missing \|1.4.1\|	4
Offside Front Footrest insecure \|6.2.1a\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Steering linkage has excessive free play \|2.2.2\|	4
Offside Front Direction indicator not working \|1.5.1c\|	4
Rear Position lamp not working (4.2.1 (a))	4
Rear Position lamp not working \|4.2.1 \|a\|\|	4
Front Direction indicator not working \|1.5.1c\|	4
All position lamps not working (4.2.1 (a))	4
Front Position lamp not working (4.2.1 (a))	4
Offside Rear Direction indicators not working \|1.5.1c\|	4
Fuel system component leaking \|7.2.1a\|	4
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Direction indicator flashing more than 120 times per minute \|1.5.1c\|	3
Rear Chain guard insecure \|6.2.1c\|	3
Front Footrest insecure \|6.2.1a\|	3
Drive chain excessively loose (6.1.7 (c) (i))	3
Nearside Front Direction indicator damaged and function impaired \|1.5.3a\|	3
Front Brake cable excessively corroded \|3.2.A1b\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Rear Footrest missing \|6.2.1a\|	3
Nearside Front Direction indicators not working \|1.5.1c\|	3
Offside Front Direction indicators not working \|1.5.1c\|	3
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	3
Dipswitch does not deflect the main beam/s, making them into dipped beam/s \|1.2.2b\|ii\|\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	3
Rear Wheel spoke cracked. \|4.2.1b\|	3
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Rear Wheel spoke excessively bent \|4.2.1b\|	3
An item not tested \|Manual\|	3
Horn sounds harsh or grating \|1.7.3c\|	3
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	3
Nearside Front Lower Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Lower Front suspension assembly excessive wear or free play in a front suspension component \|2.3.4\|	3
Front suspension assembly component excessively misaligned \|2.3.1\|	3
Stop lamp not working (4.3.1 (a) (ii))	3
Headlamp main beam affected by the operation of the horn \|1.2.2c\|	3
Nearside Direction indicator not working \|1.5.1c\|	3
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Central Front Upper Steering headbearing has excessive wear or free play \|2.2.2 \|f\| \|i\|\|	3
Rear Stop lamp not working (4.3.1 (a) (ii))	3
Headlamp insecure \|1.2.3b\|	3
Headlamp not working on main beam \|4.1.1 \|a\| \|ii\|\|	3
Front Front wheel spindle securing nut locking device missing \|2.3.5a\|	3
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	3
All direction indicators not working (4.4.1 (a) (ii))	3
Nearside Rear Direction indicator damaged and function impaired \|1.5.3a\|	3
Front Front mudguard insecure \|2.3.7\|	3
Offside Rear Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	3
Horn is not continous or uniform \|1.7.3c\|	3
Front Stop lamp not working (4.3.1 (a) (ii))	3
Exhaust excessively deteriorated \|7.1.1a\|	3
Front wheel spindle securing nut locking device missing \|2.3.5a\|	3
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear Wheel bearing has excessive play (5.1.3 (a) (i))	3

MOT History from tests of petrol HONDA C90s year 1987

Find us on Facebook