| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Registration plate issues | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
| Fuel system component leaking fuel tap leaking |7.2.1a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Headlamp insecure |1.2.3b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Front suspension spring worn and seriously weakened |2.3.2b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Fork yoke insecure bolt loose (2.2.2 (d) (i)) | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component play in bushs |2.3.4| | 1 |
| Brake locking device missing rear torque arm no lock nut |3.2.A1e| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Rear Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Upper Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Centre Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. |2.3.8| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Nearside Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced frame (6.1.1 (c) (i)) | 1 |
| Offside Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced frame (6.1.1 (c) (i)) | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced near both rear shock absorber tops (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Upper Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced frame between shock absorbers (6.1.1 (c) (i)) | 1 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |