Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Rear brake binding | 5 |
Rear parking brake recording little or no effort | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Parking brake lever has no reserve travel |3.1.6b| | 4 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Headlamp aim out of alignment | 4 |
Rear Mechanical brake component has restricted free movement | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Registration plate lamp issues | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Centre Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Nearside Rear rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Registration plate issues | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |