Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 6 |
Rear brake binding | 6 |
Offside front brake binding |3.7.B.1| | 5 |
Nearside front brake binding |3.7.B.1| | 4 |
Registration plate lamp issues | 4 |
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 3 |
Stop lamp not working |1.2.1b| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside front brake recording little or no effort |3.7.B.5a| | 2 |
Front brake application uneven | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Headlamp aim out of alignment | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Rear brake application uneven | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Windscreen washer not working | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Mechanical brake component has restricted free movement | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside front brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Centre Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension arm locating pin insecure |2.4.G.3a| | 1 |
Nearside Front Suspension arm locating pin insecure |2.4.G.3a| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Steering column universal joint insecure |2.1.5| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Registration plate issues | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired underside |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded x 2 |2.4.A.3| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Fuel cap/sealing device sealing washer torn |7.2.4c| | 1 |
Nearside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear An item not tested |Manual| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Stop lamp not working (1.2.1b) | 1 |
Offside Stop lamp not working (1.2.1b) | 1 |
Vehicle Identification Number not displayed (0.2 (a)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |