MOT History from tests of petrol HARLEY-DAVIDSON ROADKINGs year 1995

Review the list of common HARLEY-DAVIDSON ROADKING failures below or to perform a specific mot history check on your HARLEY-DAVIDSON then use our popular KnowYourCar service

mot history

Pass percent:86.06%

(The average a petrol HARLEY-DAVIDSON ROADKING year 1995 passes without issue)

Based on:165 MOT Tests

Most common failures	No# failures
Registration plate issues	8
Headlamp aim out of alignment	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	1
Brake hose damaged	1
Lower Drive belt guard insecure \|6.2.1c\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Offside Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear Brake hose leaking fluid \|3.2.B4\|	1
Horn not working \|1.7.3a\|	1
Rear Decelerometer brake test indicates a binding brake \|3.3.E1d\|	1
Offside Rear Rear wheel spindle securing nut locking device insecure \|2.4.A.2b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Position lamp not working (4.2.1 (a))	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	8
Headlamp aim out of alignment	2
Nearside Indicator tell tale not functioning \|1.5.2\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	1
Brake hose damaged	1
Lower Drive belt guard insecure \|6.2.1c\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Stop lamp not working (4.3.1 (a) (ii))	1
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii))	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front Direction indicators not working \|1.5.1c\|	1
Offside Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear Brake hose leaking fluid \|3.2.B4\|	1
Horn not working \|1.7.3a\|	1
Rear Decelerometer brake test indicates a binding brake \|3.3.E1d\|	1
Offside Rear Rear wheel spindle securing nut locking device insecure \|2.4.A.2b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Front Position lamp not working (4.2.1 (a))	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1

MOT History from tests of petrol HARLEY-DAVIDSON ROADKINGs year 1995

Find us on Facebook