| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 50 |
| Rear reflector on motorcycle missing |1.4.1| | 30 |
| Registration plate issues | 24 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear reflector missing (4.8.2 (a) (ii)) | 7 |
| Stop lamp remains on when the brakes are released | 7 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Upper Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear reflector missing replaced at the garage (4.8.2 (a) (ii)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear reflector on motorcycle missing (1.4.1) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Rear Footrest insecure (6.2.12 (a)) | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Central Front Lower Brake indicates excessive fluctuation of brake effort large fluctuation to braking performance throughout breaking range (1.2.1 (e)) | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls rear brake (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Central Rear Upper Rear reflector missing rear reflector missing - replaced as necessary (4.8.2 (a) (ii)) | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Central Front Headlamp insecure Tighten Mounting bolts (4.1.1 (c)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Horn not working |1.7.3a| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake excessively binding caliper incorrectly mounted |1.2.1 |f|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |