Most common failures | No# failures |
---|
Registration plate issues | 27 |
Headlamp aim out of alignment | 15 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Brake pipe excessively corroded | 2 |
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake fluid contaminated (1.8 (a)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Front Wheel spoke cracked 6 x spokes |5.2.2 |d|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Riders seat missing |6.2.1a| | 1 |
Nearside Outer Sidecar suspension has an insecure unit. Suspension unit loose |5.2.3a| | 1 |
Nearside Rear Lower Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Lower Direction indicator incorrect colour |1.5.1b| | 1 |
Registration plate lamp issues | 1 |
Rear Stop lamp light intensity significantly reduced from front and rear control (4.3.3 (a) (ii)) | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |