| Most common failures | No# failures |
|---|
| Registration plate issues | 39 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Headlamp aim out of alignment | 9 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Handlebar mounting clamp loose |2.1.1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Registration plate lamp issues | 1 |
| Offside Front Upper Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
| Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Rear Exhaust mounting does not fully support the exhaust system rear exhaust bracket missing |7.1.1.c| | 1 |
| Exhaust is leaking and excessively noisey rear header cracked leaking |7.1.1b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Exhaust mounting missing |7.1.1c| | 1 |
| Throttle operating incorrectly Throttle sticking (6.2.7 (a) (i)) | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear An item not tested |Manual| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Stop lamp not working front or rear (4.3.1 (a) (ii)) | 1 |
| Offside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Horn not working |1.7.3a| | 1 |