| Most common failures | No# failures |
|---|
| Registration plate issues | 71 |
| Headlamp aim out of alignment | 67 |
| Rear reflector on motorcycle missing |1.4.1| | 21 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 12 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear reflector missing (4.8.2 (a) (ii)) | 10 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Horn not working |1.7.3a| | 6 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Registration plate lamp issues | 2 |
| Centre Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Upper Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Rear Lower Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Direction indicators affected by the operation of another lamp Front indicators constant operation |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp Rear indicators are the wrong colour, are permanantly lit and affect the operation of another lamp |1.5.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Wheel spoke excessively loose all spokes in rear wheel loose |4.2.1b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Offside Front Upper Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticking, adjusted to correct . (6.2.7 (a) (ii)) | 1 |
| Central Rear Lower Rear reflector missing no rear reflector - one fitted as required. (4.8.2 (a) (ii)) | 1 |
| Fork yoke modification unsafe LOCK STOP MISSING HANDLE BARS FOULING FUEL TANK ON LOCK (2.2.2 (e)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect flickup to right (4.1.2 (c)) | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Front Stop lamp switch with a delay in operation switch sticking (4.3.2 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Offside Rear Brake linkage has restricted free movement brake pedal (1.1.15 (e)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Rear Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |