MOT History from tests of petrol HARLEY DAVIDSON ROADs year 1994

Review the list of common HARLEY DAVIDSON ROAD failures below or to perform a specific mot history check on your HARLEY DAVIDSON then use our popular KnowYourCar service

mot history

Pass percent:89.52%

(The average a petrol HARLEY DAVIDSON ROAD year 1994 passes without issue)

Based on:124 MOT Tests

Most common failures	No# failures
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Front position lamp does not illuminate immediately when switched on main beam \|1.1.3a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Front wheel bearings are excessively rough & slight play \|2.3.5b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Registration plate issues	1
Nearside Direction indicator not working (4.4.1 (a) (ii))	1
Handlebar mounting insecure Excess movement in handlebar mounting rubbers (2.2.1 (a) (i))	1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))	1
Stop lamp remains on when the brakes are released	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Rear reflector missing (4.8.2 (a) (ii))	1
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Front position lamp does not illuminate immediately when switched on main beam \|1.1.3a\|	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
Front Front wheel bearings are excessively rough & slight play \|2.3.5b\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Registration plate issues	1
Nearside Direction indicator not working (4.4.1 (a) (ii))	1
Handlebar mounting insecure Excess movement in handlebar mounting rubbers (2.2.1 (a) (i))	1
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))	1
Stop lamp remains on when the brakes are released	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Rear reflector missing (4.8.2 (a) (ii))	1
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii))	1

MOT History from tests of petrol HARLEY DAVIDSON ROADs year 1994

Find us on Facebook