Most common failures | No# failures |
---|
Registration plate issues | 27 |
Headlamp aim out of alignment | 22 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Stop lamp remains on when the brakes are released | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Horn not working |1.7.3a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Horn not working (7.7 (a)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Nearside Front Brake hose excessively kinked |3.2.B3a| | 1 |
Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Exhaust mounting does not fully support the exhaust system mounting bolts missing |7.1.1.c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel system component leaking carb leaking (6.1.3 (b) (i)) | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |