Most common failures | No# failures |
---|
Registration plate issues | 68 |
Headlamp aim out of alignment | 37 |
Rear reflector on motorcycle missing |1.4.1| | 26 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Front Headlamp insecure |1.2.3b| | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Brake hose excessively deteriorated | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Footrest insecure grub screw missing,but main fixing bolt has been tightened |6.2.1a| | 1 |
Central Rear Rear reflector missing rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp aim not tested BADLY INSECURE |1.6| | 1 |
Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
Offside Rear Brake master cylinder severely corroded Corroded Lid and fluid contamination |3.2.B1b| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Front Horn not working |1.7.3a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
Rear Stop lamp switch with a delay in operation rear switch not working (4.3.2 (a) (ii)) | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Throttle operating incorrectly Throttle stinking from lock to lock |6.2.7 |a| |i|| | 1 |
Offside Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working bulb (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Front Brake disc significantly and obviously worn Below minimum thickness (1.1.14 (a) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies does not come on with front brake |1.3.1a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
Registration plate lamp issues | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Centre Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Brake pedal insecure |3.1.2a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Drive belt excessively loose. |6.2.1d| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Central Rear Upper Position lamp not working Side light bulb not working (4.2.1 (a)) | 1 |
Central Rear Upper Position lamp not working Brake light bulb not working (4.2.1 (a)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |