| Most common failures | No# failures |
|---|
| Registration plate issues | 25 |
| Headlamp aim out of alignment | 22 |
| Rear reflector missing (4.8.2 (a) (ii)) | 7 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Direction indicator affected by the operation of another lamp remain illuminated as driving lights |1.5.1c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Position lamp not working main beam (4.2.1 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Centre Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Registration plate lamp issues | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Fuel cap ineffective seal decade (6.1.3 (b) (i)) | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Brake hose damaged | 1 |
| Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Headlamp insecure headlight slightly loose. |1.2.3b| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Direction indicator not working none of the indicators illuminate when switched on |1.5.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Drive belt pulley excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Headlamp aim beam image too far to the right |1.6.4| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Rear Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Front Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Drive belt excessively tight |6.2.1d| | 1 |
| Offside Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear Wheel spoke missing (5.2.2 (d)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |