Most common failures | No# failures |
---|
Registration plate issues | 23 |
Headlamp aim out of alignment | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Headlamp incorrect colour |1.2.1| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Upper Direction indicator missing |1.5.1a| | 1 |
Rear Upper Direction indicator obscured |1.5.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Stop lamp does not illuminate by the operation of both brake controls rear switch connections cleaned (4.3.2 (a) (iii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Direction indicator not working |1.5.1c| | 1 |
Handlebar grip insecure to handlebar glued on ,leave for an hour before riding (2.2.1 (d) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive belt guard insecure |6.2.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Registration plate lamp issues | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Footrest insecure |6.2.12 |a|| | 1 |
Front Upper Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Direction indicator not working wire connection unpluged |1.5.1c| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies foot |1.3.1a| | 1 |
Handlebar so insecure it is likely to become detached bars where slightly loose (2.2.1 (b) (ii)) | 1 |
All direction indicators not working all not working |4.4.1 |a| |ii|| | 1 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls Front brake light switch not operating (4.3.2 (a) (iii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear wheel spindle split pin m,issing |6.2.1h| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |