MOT History from tests of petrol HARLEY DAVIDSON FLSTFs year 2007

Review the list of common HARLEY DAVIDSON FLSTF failures below or to perform a specific mot history check on your HARLEY DAVIDSON then use our popular KnowYourCar service

mot history

Pass percent:90.21%

(The average a petrol HARLEY DAVIDSON FLSTF year 2007 passes without issue)

Based on:3,750 MOT Tests

Most common failures	No# failures
Registration plate issues	121
Headlamp aim out of alignment	55
Rear reflector on motorcycle missing \|1.4.1\|	30
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	19
Rear reflector missing (4.8.2 (a) (ii))	13
Rear Position lamp not working (4.2.1 (a))	12
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	11
Rear Stop lamp not working (4.3.1 (a) (ii))	10
Stop lamp remains on when the brakes are released	9
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	8
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	7
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	6
Stop lamp not working (4.3.1 (a) (ii))	5
Front wheel bearings have excessive free play \|2.3.5b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Registration plate lamp issues	4
Horn not working \|1.7.3a\|	3
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Stop lamp not working (4.3.1 (a) (ii))	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Offside Rear Direction indicators not working \|1.5.1c\|	3
Horn not working (7.7 (a))	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Central Rear Rear reflector missing (4.8.2 (a) (ii))	2
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	2
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))	2
Offside Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	121
Headlamp aim out of alignment	55
Rear reflector on motorcycle missing \|1.4.1\|	30
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	19
Rear reflector missing (4.8.2 (a) (ii))	13
Rear Position lamp not working (4.2.1 (a))	12
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	11
Rear Stop lamp not working (4.3.1 (a) (ii))	10
Stop lamp remains on when the brakes are released	9
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	8
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	7
Front wheel bearings are excessively rough \|2.3.5b\|	7
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	7
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))	6
Stop lamp not working (4.3.1 (a) (ii))	5
Front wheel bearings have excessive free play \|2.3.5b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	4
Registration plate lamp issues	4
Horn not working \|1.7.3a\|	3
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	3
Front Stop lamp not working (4.3.1 (a) (ii))	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Offside Rear Direction indicators not working \|1.5.1c\|	3
Horn not working (7.7 (a))	3
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Central Rear Rear reflector missing (4.8.2 (a) (ii))	2
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	2
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))	2
Offside Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	2
Nearside Front Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2

MOT History from tests of petrol HARLEY DAVIDSON FLSTFs year 2007

Find us on Facebook