Most common failures | No# failures |
---|
Registration plate issues | 13 |
Rear reflector on motorcycle missing |1.4.1| | 10 |
Headlamp aim out of alignment | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Horn not working |1.7.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Direction indicator obscured |1.5.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
Offside Rear Direction indicator obscured |1.5.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake has no recorded effort at a wheel Rear wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |