| Most common failures | No# failures |
|---|
| Registration plate issues | 15 |
| Headlamp aim out of alignment | 11 |
| Rear reflector on motorcycle missing |1.4.1| | 9 |
| Registration plate lamp issues | 4 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Horn not working (7.7 (a)) | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Brake hose excessively deteriorated | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Front Fork yoke cracked |2.1.1b| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Motorcycle structure cracked |6.1.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Throttle operating incorrectly throttle sticking on right lock due to lubrication and cable position |6.2.1f| | 1 |
| Steering control handlebar movement restricted by trapped cables throttle cables restricting movement due to routing |2.1.2c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Inner Front Direction indicator not working |1.5.1c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering Fork clamp bolt missing & stud bent (6.1.1 (a) (ii)) | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |