| Most common failures | No# failures |
|---|
| Registration plate issues | 30 |
| Rear reflector on motorcycle missing |1.4.1| | 23 |
| Headlamp aim out of alignment | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Registration plate lamp issues | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Horn not working |1.7.3a| | 1 |
| Offside Front Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling handling. (2.4 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the steering steering. (2.4 (a)) | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii|| | 1 |
| Headlamp aim beam image kick up to the offside BEAM BENDER FITTED |1.6| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Handlebar grip insecure to handlebar falls off and spins (2.2.1 (d) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Front Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp remains on when the brake is released Front brake control |1.3.1e| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Throttle operating incorrectly Throttle cables shielding worn through at upper yoke cover |6.2.1f| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort fluctuating by 100KG (1.2.1 (e)) | 1 |