Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Registration plate issues | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn sound not in accordance with requirements too quiet (7.7 (c)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Riders seat insecure seat pan not bolted down (6.2.5 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Headlamp aim not tested low beam not working (4.1.2 (b)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working rear brake operation |4.3.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Throttle operating incorrectly sticking |6.2.7 |a| |i|| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil leaking on to brakes |2.3.3| | 1 |
Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Centre Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Brake lever attachment screws loose |3.1.2b| | 1 |
Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Horn not working |1.7.3a| | 1 |
All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |