MOT History from tests of petrol GAS GAS EC200s year 2003

Review the list of common GAS GAS EC200 failures below or to perform a specific mot history check on your GAS GAS then use our popular KnowYourCar service

mot history

Pass percent:79.87%

(The average a petrol GAS GAS EC200 year 2003 passes without issue)

Based on:154 MOT Tests

Most common failures	No# failures
Registration plate issues	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	4
Rear reflector on motorcycle missing \|1.4.1\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp aim out of alignment	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	2
Horn missing \|1.7.1\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Lower Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Lower Shock absorber has an excessively worn bush \|5.3.2 \|c\|\|	1
Front Stop lamp missing \|1.3.3a\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Horn not working \|1.7.3a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.5a\|	1
Rear wheel spindle loose \|2.4.A.2b\|	1
Exhaust mounting missing \|7.1.1c\|	1
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Suspension component pin or bush excessively worn \|5.3.4 \|a\| \|i\|\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Horn control not readily accesible. \|1.7.2a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front Indicator switch insecure \|1.5.4\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Registration plate issues	11
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	4
Rear reflector on motorcycle missing \|1.4.1\|	3
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	2
Headlamp aim out of alignment	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front wheel bearings have excessive free play \|2.3.5b\|	2
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	2
Horn missing \|1.7.1\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Lower Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Lower Shock absorber has an excessively worn bush \|5.3.2 \|c\|\|	1
Front Stop lamp missing \|1.3.3a\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Horn not working \|1.7.3a\|	1
Nearside Rear Direction indicators not working \|1.5.1c\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25% \|1.2.2 \|a\| \|i\|\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front wheel spindle securing nut\|s\| loose \|2.3.5a\|	1
Rear wheel spindle loose \|2.4.A.2b\|	1
Exhaust mounting missing \|7.1.1c\|	1
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Suspension component pin or bush excessively worn \|5.3.4 \|a\| \|i\|\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Horn control not readily accesible. \|1.7.2a\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Nearside Front Indicator switch insecure \|1.5.4\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1

MOT History from tests of petrol GAS GAS EC200s year 2003

Find us on Facebook