Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 10 |
Registration plate issues | 9 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Headlamp aim out of alignment | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working (7.7 (a)) | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Horn not working |1.7.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering linkage locking device ineffective top yoke nut lose (2.1.3 (d)) | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Horn missing |1.7.1| | 1 |
Front Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Horn not working Not fitted. (7.7 (a)) | 1 |
Position lamp showing white light to the rear Tail light damaged. (4.2.3 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak Both sides (5.3.2 (b)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working when using rear brake control (4.3.1 (a) (ii)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Stop lamp not working both (4.3.1 (a) (ii)) | 1 |
Registration plate lamp issues | 1 |
Front Lower Suspension rod ball joint excessively worn linkage (5.3.4 (a) (i)) | 1 |
Stop lamp not working rear brake light switch (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |