Most common failures | No# failures |
---|
Registration plate issues | 47 |
Headlamp aim out of alignment | 23 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 15 |
Horn not working |1.7.3a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Registration plate lamp issues | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Headlamp aim not tested (4.1.2 (b)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Front wheel bearings have excessive free play (2.3.5b) | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Horn missing |1.7.1| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Wheel more than one fixing loose (5.2.1 (a) (ii)) | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Stop lamp deteriorated and function impaired switch broken |1.3.3a| | 1 |
Brake pedal attachment screws missing. clevis pin missing |3.1.2b| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Horn not working |1.7.3a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear suspension bearing has excessive free play swinging arm and linkage |2.4.A2a|i|| | 1 |
Brake linkage clevis joint excessively worn rear split pin replaced by wire |3.2.A1d| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Rear Brake caliper damaged and braking performance affected rear caliper has excessive freeplay (1.1.16 (a) (ii)) | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Rear Brake pedal pivots excessively worn (3.1.3a) | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Rear Lower Suspension arm ball joint excessively worn pivot front bush (5.3.4 (a) (i)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Horn control defective |1.7.2a| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Suspension arm pin or bush excessively worn Linkage joints (5.3.4 (a) (i)) | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Rear suspension bush excessively deteriorated swing arm |2.4.A2a|i|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working by operation of front brake (4.3.1 (a) (ii)) | 1 |
Central Rear Outer Position lamp not working (4.2.1 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Front wheel bearings have excessive free play (2.3.5b) | 1 |
Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear Motorcycle structure joining/attachment plate or fastening insecure FENDER ASSEMBLY LOOSE (6.1.1 (b) (i)) | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Rear Headlamp missing |1.2.3a| | 1 |
Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Shock absorber has a serious fluid leak both fork seals (5.3.2 (b)) | 1 |
Fuel system component leaking overflow/stop tap (6.1.3 (b) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Chain guard fouling another component |6.2.1c| | 1 |
Fuel tank leaking (6.1.3 (b) (i)) | 1 |
Brake performance not tested |3.3| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Central Front Upper Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Central Rear Upper Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel spoke excessively loose Multiple spokes (5.2.2 (d)) | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Drive chain excessively loose (6.2.1d) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear suspension bush has excessive free play bottom shock absorber bush (2.4.A2a(i)) | 1 |
Clutch lever positioned so it cannot be readily operated. (6.2.1g) | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |