Most common failures | No# failures |
---|
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Headlamp aim out of alignment | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front suspension has excessive play in an outer ball joint |2.5.B.2a| | 1 |
Brake valve insecurely mounted |3.6.A.2a| | 1 |
Rear brake binding | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Outer Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Steering rack excessively corroded and unserviceable |2.2.C.1d| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |