Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 15 |
Headlamp aim out of alignment | 11 |
Offside Rear fog lamp not working |1.3.2b| | 10 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Registration plate lamp issues | 5 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 4 |
Offside Stop lamp not working |1.2.1b| | 4 |
Offside Rear Stop lamp not working |1.2.1b| | 4 |
Nearside Stop lamp not working |1.2.1b| | 4 |
Rear fog lamp not working |1.3.2b| | 4 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Lower Ball joint has excessive play |2.2.B.1f| | 3 |
Windscreen has damage | 3 |
Windscreen washer not working | 3 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp emits a light other than red |1.3.2e| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Lower Ball joint has excessive play |2.2.B.1f| | 2 |
Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside front inner sill |6.1.B.2| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside front inner sill |6.1.B.2| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside middle outer sill |6.1.B.2| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear outer sill |6.1.B.2| | 1 |
Offside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D type |2.4.G.2| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Coil spring not correctly located |2.4.C.2| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Inner Towbar excessively corroded within 30cm of towbar mounting valance |6.1.6 |i| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Anti-roll bar pin or bush excessively worn both rear D bushes |5.3.4 |a| |i|| | 1 |
Offside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn D bush |5.3.4 |a| |i|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember |5.3.6 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases middle and tail boxes |6.1.2 |a|| | 1 |
Nearside Rear Towbar excessively corroded within 30cm of towbar mounting cross member |6.1.6 |i| |i|| | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis to wheel arch liner and wheel arch liner |7.1.1 |a| |i|| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.3.A.1| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
Nearside passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear parking brake recording little or no effort | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
Brakes imbalanced across an axle | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
Offside Front Anti-roll bar pin or bush excessively worn d bush |5.3.4 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 1 |
Nearside Rear Body panel corroded and likely to cause injury wheelarch sharp edge (6.2.1 (a) (i)) | 1 |
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill,as marked (7.1.1 (a) (i)) | 1 |
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill,as marked (7.1.1 (a) (i)) | 1 |
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked (7.1.1 (a) (i)) | 1 |
Centre Exhaust has a major leak of exhaust gases exhaust holed and blowing |7.1.2| | 1 |
Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.2.C.1c| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Offside Rear fog lamp insecure |1.3.2a| | 1 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Parking brake operation grabbing severely |3.7.C.3b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Offside Front Steering locking device missing track rod end split pin |2.1.3 |d|| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Rear fog lamp switch missing |4.5.3 |a| |ii|| | 1 |
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i|| | 1 |
Brake pipe excessively corroded | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
Fuel system component leaking excessively or a risk of fire ENGINE BAY |6.1.3 |b| |ii|| | 1 |
Emissions not tested DUE TO FUEL LEAK |8.2.2.2 |e|| | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii|| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Statutory seat belt missing rear catches |under seat? | |5.1.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Inner Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Obligatory mirror missing |8.1.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Rear fog lamp switch missing (4.5.3 (a) (ii)) | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Nearside Windscreen wiper missing (3.4 (a)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Front Integral body structure has excessive corrosion which adversely affects braking or steering X member (6.1.1 (c) (ii)) | 1 |
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sills (6.2.2 (d) (ii)) | 1 |
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sills (6.2.2 (d) (ii)) | 1 |
Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired X member (6.2.2 (d) (ii)) | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front and rear inner wheel arches (6.2.2 (d) (i)) | 1 |
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front and rear inner arches (6.2.2 (d) (i)) | 1 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Inner Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Offside Front Lower Subframe mounting prescribed area is excessively corroded on front cross member
|2.4.A.3| | 1 |
Nearside Front Lower Subframe mounting prescribed area is excessively corroded on front cross member |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded on outer sill |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded on inner & outer sill |2.4.A.3| | 1 |
Brake hose excessively deteriorated | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill holed. |6.2.2 |d| |i|| | 1 |
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Top chassis rail. |6.2.2 |d| |i|| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Position lamp not working bulb replaced |4.2.1 |a|| | 1 |
Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i|| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i|| | 1 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Front Track rod end modification unsafe (2.1.3 (f) (i)) | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
Front Battery insecure |1.9.1| | 1 |
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |