Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 6 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Headlamp aim out of alignment | 3 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Front brake application uneven | 2 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under door |6.1.B.2| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Brake pipe excessively corroded | 1 |
Central Prop shaft likely to become detached mounting (6.1.7 (a) (ii)) | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Subframe mounting point. (6.1.1 (c) (i)) | 1 |
Central Front Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
Central Rear Prop shaft flexible coupling excessively deteriorated (6.1.7 (d) (i)) | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded inner and outer |2.4.A.3| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near shock mounting (6.2.2 (d) (i)) | 1 |
Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced wheel housing under battery (6.1.1 (a) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill under door step (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor near wheel housing/leafspring (6.1.1 (c) (i)) | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill under door step (6.1.1 (c) (i)) | 1 |
Rear Prop shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under door |6.1.B.2| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |